Get A Quote Now

Effecto PU

Waterproof microcement and low in VOCs | Efectto PU

Efectto PU, the waterproof microcement that redefines standards in construction and space renovation, stands out as the most mechanically resistant microcement low in VOCs on the market. Formulated with polyurethane, Efectto PU ensures efficiency, durability, and maximum protection in spaces exposed to humidity, making it the ideal professional choice for all types of projects, even the most demanding ones. This microcement system facilitates application, optimising time without compromising quality. We make the difficult seem easy because professionals have never had it simpler: its water-based solvent-free formulation enables a waterproof and highly resistant finish, speeding up execution times for both indoor and outdoor projects. Once you try it, you’ll never look back. Moreover, our waterproof microcement carries the CE marking, certifying its compliance with the quality and safety standards required by European regulations.

How to apply waterproof microcement Efectto PU on floors

Step 1. Level and clean the floor
Level and consolidate the floor surface. Clean and dry it properly to remove dust, grease, and paint residues.

Apply the appropriate primer according to the surface type:

 PRIMACEM® PLUS for non-absorbent surfaces.

 PRIMACEM® ABS for absorbent surfaces.

For tiled floors or surfaces with joints, apply PRIMACEM® JOINT to fill the joints and allow 12 to 24 hours to dry before priming.

Mix Component A with a stirrer and add the ARCOCEM® PLUS colour toner. Then, add Component B to Component A in a 10:0.875 ratio and mix at low speed using a mechanical stirrer.
Apply two layers of Efectto PU BIG GRAIN with our ATENEA anti-burn steel trowel. For optimal work, it’s essential to maintain a 45-degree application angle
Allow each layer to dry for 12 to 24 hours, then sand with 40-grit sandpaper to achieve a perfectly smooth and even surface.
Apply 1 coat of Efectto PU MEDIUM GRAIN. It’s important to maintain the same application angle and use the ATENEA trowel.
Leave to dry for 12 to 24 hours and sand gently with 80-grit sandpaper.

Contact Us Now