Get A Quote Now

Atlanttic

Two-component microcement for swimming pools - Atlanttic Aquaciment®.

It has never been easier to design unique creations for underwater spaces. With the exclusive Atlanttic Aquaciment® line of microcement for swimming pools, unique, almost mystical sensorial experiences are created. Baths that seem almost eternal in pools that are more than pools and that become privileged enclaves. Infinite pools in their design with refined, elegant aesthetics and modern lines, as well as in their functional virtues. Excellent resistance to immersion and UV rays, permeable to water vapour, with greater impermeability to water and a non-slip finish. Continuous surfaces also on edges, multiplying the sensation of infinity. A microcement system for swimming pools with an improved formula to guarantee greater flexibility, hardness, permeability and impermeability. Two-component in nature, composed of cement and resin, the versatility of this microcement is not limited to swimming pools, as it can also be used in fountains, ponds, saunas, spas, thermal baths and other spaces in constant contact with water. Even on terraces. Let yourself be seduced by the latest trend.

How to Apply Atlanttic Aquaciment® Microcement for Pools

Step 1. PreparaStep 1. Prime the Pool with Acricem Pool Resintion of the support
Use Acricem Pool resin as a primer, applying one coat with a roller and allowing it to dry for 30 to 45 minutes.
Pour the specified amount of Acricem Pool resin into a container, stir in the pigment, and mix thoroughly. Then, add the appropriate Atlanttic Aquaciment® grain size and mix for a minimum of 2-3 minutes at a low speed.
Apply the first coat of Atlanttic Aquaciment® XXL without pigment. Allow it to dry for 4-8 hours, then sand with 24-grit sandpaper. Apply the second coat, this time with pigment, and let it dry for the same period before sanding again.
To complete the pool’s decorative finish, apply two pigmented coats of Atlanttic Aquaciment® XL, allowing each layer to dry for 4-8 hours. Sand between coats with 24-grit sandpaper. For a “wet-on-wet” application, apply the second XL coat one hour after the first.
24 hours after finishing, protect the pool microcement with two coats of Topsealer® WT Pool varnish using a roller (allowing 24 hours drying time between coats). Let it cure for 7 days.
7 days after sealing, the pool is ready to be filled with water.

Contact Us Now